| Insertion | Reinforce and insert 1-3PLY cotton, polyester, EP fabric or wire mesh SS201, SS304, SS316 |
|---|---|
| Thickness | 0.5-100.0mm |
| Width | 0.1-3.6m |
| Density | 1.20-1.40g/cm3 |
| Insulation Material | Rubber-plastic sponge material |
| Bahan | CR, CR/SBR |
|---|---|
| Warna | hitam, putih, merah, abu-abu dll. |
| Permukaan | Kain halus atau kesan |
| daya tarik | 4-12MPa |
| kekerasannya | 50-80pantai A |
| Kisaran suhu | -60°C~+320°C |
|---|---|
| Memasukkan | Memperkuat 1PLY Glassfiber Atau Kain Aramid |
| kekuatan sobek | 20-25N/mm |
| kekerasannya | 60-90 Pantai A |
| Pemanjangan | 200-400% |
| Penyusutan Moulding | 2,5%-2,8% |
|---|---|
| Molekuler | 2-6 juta |
| Warna | Berwarna |
| daya tarik | 90MPa |
| Menghasilkan | mengusir |
| lebar | 1m-2m |
|---|---|
| Tahan asam | Bagus sekali. |
| Set Kompresi | ≤25% |
| kekerasannya | 40-75 Pantai A |
| Kisaran suhu | -40 -220 ℃ |
| Bahan | 100% bahan PVC perawan |
|---|---|
| Warna | transparan, putih, kuning, biru |
| Daya tarik | 52Mpa |
| Kekuatan dampak | 5KJ / m² |
| Massa jenis | 1.2-1.5g / cm³ |
| Working Temperature | -30°C - +100°C |
|---|---|
| Width | 0.1-3.6m |
| Thickness | 0.5-100.0mm |
| Density | 1.20-1.40g/cm3 |
| Surface | Smooth/smooth, smooth/impression fabric, double impression fabric |
| Kisaran suhu | -60°C~+200°C |
|---|---|
| kekuatan sobek | 20-30N/mm |
| daya tarik | 3-6MPa |
| Ketebalan | 0,5mm-50mm |
| Panjang | 1m-20m |
| nama | Lembaran Karet Silikon |
|---|---|
| Pemanjangan | 200-400% |
| Ketebalan | 0,5mm-50mm |
| Panjang | 1m-20m |
| Ketahanan Penuaan | Bagus sekali. |
| Warna | Tembus, Putih, Hitam, Merah, Biru, dll. |
|---|---|
| Kekerasan | 10, 20, 30, 40, 50, 60, 70, 80+/-5 pantai A |
| Resistensi ozon | Bagus sekali. |
| Kisaran suhu | -60°C - +260°C (momen 300°C) |
| Panjang | 1-50M |
